Canfield Connector’s 5000 Series ISO connector connects solenoid valves using the DIN Style “A” EN175301-803 (Formerly DIN 43650) specification. This standard permits industry interchangeability and has been embraced by the solenoid valve industry worldwide. Features include the ability for the user to wire the connector into existing installations or the connector can be pre-wired at the factory. Wire connections are made inside the connector housing and the wire inlet is either PG9, PG11, or 1/2″ conduit. The maximum current rating is 10 Amps with a maximum conductor size of 14 AWG with an outer jacket not to exceed .410 inches diameter. There are CSA-approved versions as well as versions with indicator lights depicting the “on” state. The connectors are NEMA 4 and IP 65 environment rated.