lk
Linkedin Youtube

KICK@$$ Every. Single. Day.

Search
Linkedin Youtube

KICK@$$ Every. Single. Day.

Search
Contact Us
Contact Us

DORNER AQUAPRUF 7400 CONVEYORS

Dorner

Linkedin

Transforming the conveyor automation since 1966

September 8, 2021 // 1 minute read

Benefits of AquaPruf 7400 Conveyor:

  • ​Frame is designed with no horizontal surfaces for optimum cleaning. Conveyors over 10′ long consist of multiple sections which are bolted together.
  • Bearings are mounted in cast stainless steel housing for maximum performance in washdown environments.
  • Solid UHMW wear strips are easily lifted out of the frame without tools to minimize cleaning time.
  • The tool-less tip-up pulley allows the conveyor end to be lifted easily for quick access to inside of conveyor for cleaning. 
  • Conveyor is designed to withstand high pressure (100-1,500 psi) spray and chlorinated cleaning solutions.
  • The return belt supports are segmented plastic slide blocks and are easily removed without tools for effective cleaning.
  • Drive sprockets are located on a 1.5″ square stainless steel shaft without fasteners to provide optimum drive strength and cleanability
  • Frame cut-outs (optional) are available to allow spraying the inside of the conveyor without lifting the belt.
  • Nose bar idler ends (optional) are constructed of a machined UHMW bar to provide a 1.5″ diameter transfer.
  • The nose bar drive configuration (optional) allows the use of the nose bar transfer on each end of the conveyor for small product transfers.
  • Belt lifters (optional) raise the belt from the wear strips by simply pulling an external lever for fast access and effective cleaning.

General Specifications:

  • Load: 20 lbs/square-foot of belt
  • Belt widths: 6″ to 60″
  • Lengths: 36″ to 999″
  • Belt speed: 233 ft/min maximum
  • Wear strip material is UHMW
  • Continuous TIG welded 304 stainless steel frame
  • Stainless Steel Conveyors that Reduce Product Loss
  • #4 Polish on all outside surfaces
  • Bearing material is 400 stainless steel
  • Bearing lubricant is H1 type FDA lubricant
  • FDA approved belting and plastic components
15-6123bce2cd703
16-6123bcef5e092
17-6123bcfb1caef
18-6123bd0711ee0
19
20

CONNECT wITH US

We’re looking forward to helping you. Whether you have questions about products, services, or a demo, our team is ready to help.

Fields with an asterisk* are required. This information allows us to better assist you. 

We promise not to spam you and will only be sending information worth your valuable time.

Your information will not be shared beyond our organization. The information collected is simply used to better assist you. Please visit our Privacy Policy to learn more. 

en_USEnglish
es_MXEspañol de México en_USEnglish