lk

Spartan Brass Bodied Valves

Spartan Scientific

Specializing in the Fluid Power & Automation Industries

August 16, 2021 // 1 minute read

Applied Industries:

Series 6100:

The Spartan Scientific Series 6100 is a 2-Way, 2-Position direct acting In-Line style solenoid valve utilizing a long-life spring compensated solenoid poppet at the heart of an all stainless steel solenoid operator. The standard body material is brass and is available in 1/8” and 1/4” NPT. With orifice sizes ranging from 0.8mm up to 3.0mm standard, the 6100 valve can handle a wide variety of flow rates as well as pressure ranges from 0 to 600PSI in various versions. The Series 6100 employs use of the orifice basket design unique to Spartan Scientific valves which allows for quick change-over for production of any orifice size as standard. This aids in versatility of valve manufacture and increases valve availability. The brass valve body is of robust design and is compatible with liquids and gases at lowest possible cost. All common voltages are offered as well as electrical connection styles which include a DIN 43650 spaded coil as well as flying lead styles. Coils are sealed to IP 65.

Series 6100:

The Spartan Scientific Series 6100 is a 2-Way, 2-Position direct acting In-Line style solenoid valve utilizing a long-life spring compensated solenoid poppet at the heart of an all stainless steel solenoid operator. The standard body material is brass and is available in 1/8” and 1/4” NPT. With orifice sizes ranging from 0.8mm up to 3.0mm standard, the 6100 valve can handle a wide variety of flow rates as well as pressure ranges from 0 to 600PSI in various versions. The Series 6100 employs use of the orifice basket design unique to Spartan Scientific valves which allows for quick change-over for production of any orifice size as standard. This aids in versatility of valve manufacture and increases valve availability. The brass valve body is of robust design and is compatible with liquids and gases at lowest possible cost. All common voltages are offered as well as electrical connection styles which include a DIN 43650 spaded coil as well as flying lead styles. Coils are sealed to IP 65.

Series 6222

The Spartan Scientific Series 6222 solenoid valves are used as 2-Way & 3-Way, 2-Position, Normally Closed, Normally Open, Mixing or Diverting functions for the control of air, caustics, inert gases, oil, and water. The robust design incorporates all stainless steel stop plunger and tube assembly as well as spring compensated top seats installed in a no-lead brass forged body with 1/8”, 1/4” and 3/8” NPT ports standard. Available in 0.8mm (0.03 Cv) to 6.0mm (0.72 Cv) orifice sizes, the 6222 can control a broad range of flow and pressure ratings. Standard elastomers are EPDM, FKM or NBR for media compatibility. The class F coils are all Glass-Filled Nylon encapsulated, 100% duty, all standard voltages, and are available in DIN 43650 Form “A”, flying lead, DIN form A connector with 1/2” conduit.

Series 6222

The Spartan Scientific Series 6222 solenoid valves are used as 2-Way & 3-Way, 2-Position, Normally Closed, Normally Open, Mixing or Diverting functions for the control of air, caustics, inert gases, oil, and water. The robust design incorporates all stainless steel stop plunger and tube assembly as well as spring compensated top seats installed in a no-lead brass forged body with 1/8”, 1/4” and 3/8” NPT ports standard. Available in 0.8mm (0.03 Cv) to 6.0mm (0.72 Cv) orifice sizes, the 6222 can control a broad range of flow and pressure ratings. Standard elastomers are EPDM, FKM or NBR for media compatibility. The class F coils are all Glass-Filled Nylon encapsulated, 100% duty, all standard voltages, and are available in DIN 43650 Form “A”, flying lead, DIN form A connector with 1/2” conduit.

Series 3827

The Spartan Scientific Series 3827 is a composite body solenoid valve offered in both 2-Way & 3-Way, 2-Position Normally Closed or Normally Open functions and eight orifice sizes. Component features include the proven Series 3800 solenoid operator available in brass/stainless steel or all stainless steel pilot design, optional seal materials and nylon encapsulated coil. The “basket” orifice design feature allows the possibility of changing the orifice diameter to meet flow requirements within a matter of seconds. The composite material is media compatible, eliminating the need for stocking multiple body materials. Useful in medical and ventilator devices.

Series 3827

The Spartan Scientific Series 3827 is a composite body solenoid valve offered in both 2-Way & 3-Way, 2-Position Normally Closed or Normally Open functions and eight orifice sizes. Component features include the proven Series 3800 solenoid operator available in brass/stainless steel or all stainless steel pilot design, optional seal materials and nylon encapsulated coil. The “basket” orifice design feature allows the possibility of changing the orifice diameter to meet flow requirements within a matter of seconds. The composite material is media compatible, eliminating the need for stocking multiple body materials. Useful in medical and ventilator devices.

Series 3505

The Spartan Scientific Series 3505 is a 2-Way, 2-Position, internally piloted solenoid valve for the control of air, emulsion, inert gases and water. The valve features an all brass body and a full flow 1/2” orifice while maintaining a 1.5 minimum pressure differential. The design allows for a tight seal on the orifice at 0 psi. Available in 1/4”, 3/8” and 1/2” NPT, the 3505 can handle pressures to 230 psi. The encapsulated coil construction ensures that the valve functions well under long periods of activation (100% duty), as well as providing a high degree of environmental protection (NEMA 4). The inner valve functions as a direct assist using a flat diaphragm and orifice plate. Pressure differentials shift the valve to full open or full closed. A push, non-locking manual override is standard.

Series 3505

The Spartan Scientific Series 3505 is a 2-Way, 2-Position, internally piloted solenoid valve for the control of air, emulsion, inert gases and water. The valve features an all brass body and a full flow 1/2” orifice while maintaining a 1.5 minimum pressure differential. The design allows for a tight seal on the orifice at 0 psi. Available in 1/4”, 3/8” and 1/2” NPT, the 3505 can handle pressures to 230 psi. The encapsulated coil construction ensures that the valve functions well under long periods of activation (100% duty), as well as providing a high degree of environmental protection (NEMA 4). The inner valve functions as a direct assist using a flat diaphragm and orifice plate. Pressure differentials shift the valve to full open or full closed. A push, non-locking manual override is standard.

Series 3516

The Spartan Scientific Series 3516 2-Way, 2-Position Normally Closed or Normally Opened solenoid diaphragm process valve offers the highest flow for the smallest overall size in its class as compared to competitive units. The valve is designed from the ground up using modern design technologies and materials. The potable water brass body is media compatible, rugged and virtually indestructible. The body is available in 1/4”, 3/8” and 1/2” NPT. The low wattage solenoid features a DIN Style “A” EN175301-803 (Formerly DIN 43650) electrical interface and is nylon encapsulated. FKM, EPDM and NBR are standard elastomers and the operators are made of stainless steel / brass or stainless steel / brass with copper shading rings for AC versions. Typical applications include control of inert gases, water and compatible fluids.

Series 3516

The Spartan Scientific Series 3516 2-Way, 2-Position Normally Closed or Normally Opened solenoid diaphragm process valve offers the highest flow for the smallest overall size in its class as compared to competitive units. The valve is designed from the ground up using modern design technologies and materials. The potable water brass body is media compatible, rugged and virtually indestructible. The body is available in 1/4”, 3/8” and 1/2” NPT. The low wattage solenoid features a DIN Style “A” EN175301-803 (Formerly DIN 43650) electrical interface and is nylon encapsulated. FKM, EPDM and NBR are standard elastomers and the operators are made of stainless steel / brass or stainless steel / brass with copper shading rings for AC versions. Typical applications include control of inert gases, water and compatible fluids.

Series 45A0

The Spartan Scientific Series 45A0 2-Way, 2-Position Solenoid Valve is a brass bodied, stainless steel operator valve for electronic control of air, water or any seal compatible media. The versatile design is feature rich including with and without manual override, EPDM, FKM and NBR sealing materials and slow close anti-water hammer options. Additional special options include oxygen clean, and latching versions. Valves are available in 1/4”, 3/8” and 1/2” NPT and all standard AC and DC voltages. Coils are fully encapsulated and are available standard with flying lead and DIN 43650 form A with wire grip or 1/2” conduit as options.

Series 45A0

The Spartan Scientific Series 45A0 2-Way, 2-Position Solenoid Valve is a brass bodied, stainless steel operator valve for electronic control of air, water or any seal compatible media. The versatile design is feature rich including with and without manual override, EPDM, FKM and NBR sealing materials and slow close anti-water hammer options. Additional special options include oxygen clean, and latching versions. Valves are available in 1/4”, 3/8” and 1/2” NPT and all standard AC and DC voltages. Coils are fully encapsulated and are available standard with flying lead and DIN 43650 form A with wire grip or 1/2” conduit as options.

Series 4700

The Spartan Scientific Series 4700 solenoid valves are designed specifically for high flow, high pressure applications. With orifice sizes of 20mm to 25mm and port sizes of 3/4” and 1” NPT, the valve is offered with a manual override standard. The coil is a quick connect DIN 43650 Form “A” design and is encapsulated for environment resistance. Typical applications include condensation removal, car washes, autoclaves or irrigation control.

Series 4700

The Spartan Scientific Series 4700 solenoid valves are designed specifically for high flow, high pressure applications. With orifice sizes of 20mm to 25mm and port sizes of 3/4” and 1” NPT, the valve is offered with a manual override standard. The coil is a quick connect DIN 43650 Form “A” design and is encapsulated for environment resistance. Typical applications include condensation removal, car washes, autoclaves or irrigation control.

CONNECT wITH MOLLY BLYMIRE

Business Development Specialist

Whether you have questions about products, services, or a demo, our team is ready to help.

*Your information will not be shared beyond our organization. The information collected is simply used to better assist you. 

en_USEnglish