lk

Canfield Field Wired Connectors

Canfield Connector

Comprehensive variety of electrical connectors, components, & accessories

November 29, 2021 // 1 minute read

Applied Industries:

5000 - ISO Field Wireable:

Canfield Connector’s 5000 Series ISO connector connects solenoid valves using the DIN Style “A” EN175301-803 (Formerly DIN 43650) specification. This standard permits industry interchangeability and has been embraced by the solenoid valve industry worldwide. Features include the ability for the user to wire the connector into existing installations or the connector can be pre-wired at the factory. Wire connections are made inside the connector housing and the wire inlet is either PG9, PG11, or 1/2″ conduit. The maximum current rating is 10 Amps with a maximum conductor size of 14 AWG with an outer jacket not to exceed .410 inches diameter. There are CSA-approved versions as well as versions with indicator lights depicting the “on” state. The connectors are NEMA 4 and IP 65 environment rated.

5000 - ISO Field Wireable:

Canfield Connector’s 5000 Series ISO connector connects solenoid valves using the DIN Style “A” EN175301-803 (Formerly DIN 43650) specification. This standard permits industry interchangeability and has been embraced by the solenoid valve industry worldwide. Features include the ability for the user to wire the connector into existing installations or the connector can be pre-wired at the factory. Wire connections are made inside the connector housing and the wire inlet is either PG9, PG11, or 1/2″ conduit. The maximum current rating is 10 Amps with a maximum conductor size of 14 AWG with an outer jacket not to exceed .410 inches diameter. There are CSA-approved versions as well as versions with indicator lights depicting the “on” state. The connectors are NEMA 4 and IP 65 environment rated.

5000 - MINI Field Wireable:

The Canfield Connector 5000 Series field wireable MINI solenoid valve connector is a high-quality interconnection device for use with solenoid valves and pressure switches. The connector features a PG9 strain relief, 3/8″ or 1/2″ conduit wire pass through, all with screw terminals for wire connections. The MINI accommodates wire from .240″ to .410″ diameter as a standard with an AWG of 14 maximum. Environment resistance of NEMA 4 / IP 65 along with versions that are CSA approved ensure long trouble-free service. The current maximum of 10 Amps and the temperature rating of -40° to +125°C encompasses most applications. The interface is an industry-standard.

5000 - MINI Field Wireable:

The Canfield Connector 5000 Series field wireable MINI solenoid valve connector is a high-quality interconnection device for use with solenoid valves and pressure switches. The connector features a PG9 strain relief, 3/8″ or 1/2″ conduit wire pass through, all with screw terminals for wire connections. The MINI accommodates wire from .240″ to .410″ diameter as a standard with an AWG of 14 maximum. Environment resistance of NEMA 4 / IP 65 along with versions that are CSA approved ensure long trouble-free service. The current maximum of 10 Amps and the temperature rating of -40° to +125°C encompasses most applications. The interface is an industry-standard.

5000 - Sub-Micro Field Wireable:

Canfield Connector’s 5000 Series Sub-Micro connector is made to connect solenoid valves using the DIN Style “C” EN 175301-803 (Formerly DIN 43650) 8mm pin center, and the industry-standard 9.4mm pin center. These standards permit industry interchangeability and have been embraced by the solenoid valve industry worldwide. Features include the ability for the user to wire the connector into existing installations or the connector can be pre-wired at the factory. Wire connections are made inside the connector housing. The wire inlet is either PG7 or 1/2″ conduit. Maximum current rating is 6 amps with a maximum conductor size of 20 gauge with an outer jacket not to exceed .260 inches diameter. There are versions with indicator lights depicting the “on” state. The connectors are NEMA 4 and IP 65 environment rated.

5000 - Sub-Micro Field Wireable:

Canfield Connector’s 5000 Series Sub-Micro connector is made to connect solenoid valves using the DIN Style “C” EN 175301-803 (Formerly DIN 43650) 8mm pin center, and the industry-standard 9.4mm pin center. These standards permit industry interchangeability and have been embraced by the solenoid valve industry worldwide. Features include the ability for the user to wire the connector into existing installations or the connector can be pre-wired at the factory. Wire connections are made inside the connector housing. The wire inlet is either PG7 or 1/2″ conduit. Maximum current rating is 6 amps with a maximum conductor size of 20 gauge with an outer jacket not to exceed .260 inches diameter. There are versions with indicator lights depicting the “on” state. The connectors are NEMA 4 and IP 65 environment rated.

M5 - Male Quick Disconnect Interfaces:

Canfield Connector M5 Series male connectors are used as electrical quick disconnect interfaces for pneumatic and hydraulic valves and sensors. They are available in standard Industry Standard MINI, DIN Style “A” EN175301-803 (Formerly DIN 43650), Sub-Micro 8mm DIN Style “C” EN 175301-803 (Formerly DIN 43650), Industry Standard 9.4mm, and conduit arrangements. These connectors are built to mate with the Canfield Connector DIN Style female connectors. Some male connectors are available with 2+ ground or 3+ ground terminal options.

M5 - Male Quick Disconnect Interfaces:

Canfield Connector M5 Series male connectors are used as electrical quick disconnect interfaces for pneumatic and hydraulic valves and sensors. They are available in standard Industry Standard MINI, DIN Style “A” EN175301-803 (Formerly DIN 43650), Sub-Micro 8mm DIN Style “C” EN 175301-803 (Formerly DIN 43650), Industry Standard 9.4mm, and conduit arrangements. These connectors are built to mate with the Canfield Connector DIN Style female connectors. Some male connectors are available with 2+ ground or 3+ ground terminal options.

P5600 - Surge Suppression:

The Canfield Connector P5600 Series Micro Protective Connectors are a complete line of field wire style solenoid valve connectors that are offered with internal surge suppression and indicators light options. The connectors are made to meet EN175301-803 (Formerly DIN 43650) solenoid valve connector standards in all styles and configurations. The rugged design features integrated cable strain reliefs or conduit versions. The surge suppression can be tailored to need with 6 distinct versions. These connectors are designed to work seamlessly with your choice of a solenoid valve.

P5600 - Surge Suppression:

The Canfield Connector P5600 Series Micro Protective Connectors are a complete line of field wire style solenoid valve connectors that are offered with internal surge suppression and indicators light options. The connectors are made to meet EN175301-803 (Formerly DIN 43650) solenoid valve connector standards in all styles and configurations. The rugged design features integrated cable strain reliefs or conduit versions. The surge suppression can be tailored to need with 6 distinct versions. These connectors are designed to work seamlessly with your choice of a solenoid valve.

R5000 - Full Wave Bridge Rectifier:

Canfield Connector’s R5000 Series solenoid valve connectors incorporate full-wave bridge rectifiers inside the DIN Style “A” EN175301-803 (Formerly DIN 43650) connectors. This standard permits industry interchangeability and has been embraced by the solenoid valve industry worldwide. The R5000 converts alternating current to direct current reducing coil burnout due to valve sticking. Also, direct current eliminates AC “hum” inherent to alternating current. Features include the ability for the user to wire the connector into existing installations. Wire connections are made inside the connector housing and the wire inlet is either PG9, PG11, or 1/2″ conduit. The R5000 has a maximum current rating of 1 Amp continuous with a maximum wire gauge diameter of 14 AWG. An indicator light is offered for instant diagnostics and to aid setup and installation. The HT High Top connector accommodates a larger wire gauge and easy installation.

R5000 - Full Wave Bridge Rectifier:

Canfield Connector’s R5000 Series solenoid valve connectors incorporate full-wave bridge rectifiers inside the DIN Style “A” EN175301-803 (Formerly DIN 43650) connectors. This standard permits industry interchangeability and has been embraced by the solenoid valve industry worldwide. The R5000 converts alternating current to direct current reducing coil burnout due to valve sticking. Also, direct current eliminates AC “hum” inherent to alternating current. Features include the ability for the user to wire the connector into existing installations. Wire connections are made inside the connector housing and the wire inlet is either PG9, PG11, or 1/2″ conduit. The R5000 has a maximum current rating of 1 Amp continuous with a maximum wire gauge diameter of 14 AWG. An indicator light is offered for instant diagnostics and to aid setup and installation. The HT High Top connector accommodates a larger wire gauge and easy installation.

CONNECT wITH MOLLY BLYMIRE

Business Development Specialist

Whether you have questions about products, services, or a demo, our team is ready to help.

We promise not to spam you and will only be sending information worth your valuable time.
en_USEnglish