The Canfield Connector’s GT Gatormate Series consists of our 2 Pin and 3PIN, injection molded, Deutsch Type Connectors.
The connectors are over-molded to enhance connection performance and ensure that high stress or vibration will not cause unintentional disconnection.
The Canfield Connector’s GT Gatormate Series consists of our 2 Pin and 3PIN, injection molded, Deutsch Type Connectors.
The connectors are over-molded to enhance connection performance and ensure that high stress or vibration will not cause unintentional disconnection.
Canfield Connector is known for its robust connections with an American twist, and the CANFAST brand of M8 electrical connectors are no exception. This family of robust, all molded anti-vibration electrical connectors for sensors and actuators are specified by those needing a sure connection to valves, sensors, or automation of all types. Available in all industry styles including shielded and unshielded, and in various wire lengths. The CANFAST round connectors are made in the USA to strict quality standards and are ready for fast delivery.
The Canfield Connector B5950 Series is a Features include selectable control signal inputs from 0-5V or 0-20 mA with adjustable min/max current output. The output steps to the minimum current setting when 0.1V or 0.4 mA is applied to the control signal input. Also included in the compact package is a 0.1 to 20-second adjustable ramp-up and ramp-down output and sine wave dithering (PWM) with adjustable amplitude and frequency. The B5950 has an output current that is proportional to the command signal input.
The Canfield Connector TMLT is an ultra-compact all-solid-state timer incorporated into a vibration and environment-resistant composite encapsulant housing. The heart of the timer is a powerful microprocessor that is made in quantity then programmed to become the timer type according to customer specification.
Featuring 6 timer modes of operation with two voltage ranges; 12-240V AC/DC or 12-60 VDC and four output options; Sinking ON First, Sinking OFF First, Sourcing ON First, and Sourcing OFF First, and 13-time ranges, from 0.1 to 2000 seconds. The timer is available with a screwdriver or hand adjustment, and troubleshooting is a breeze with the onboard indicator light.
Canfield Connector’s 5000 Series ISO connector connects solenoid valves using the DIN Style “A” EN175301-803 (Formerly DIN 43650) specification. This standard permits industry interchangeability and has been embraced by the solenoid valve industry worldwide. Features include the ability for the user to wire the connector into existing installations or the connector can be pre-wired at the factory. Wire connections are made inside the connector housing and the wire inlet is either PG9, PG11, or 1/2″ conduit. The maximum current rating is 10 Amps with a maximum conductor size of 14 AWG with an outer jacket not to exceed .410 inches diameter. There are CSA-approved versions as well as versions with indicator lights depicting the “on” state. The connectors are NEMA 4 and IP 65 environment rated.
The Canfield 7000 Series proximity sensors are used to sense position on cylinders. They accommodate 2 to 8 inch bore tie rod cylinders or 3/4 to 4 inch round cylinders. This proven design is rugged yet cost effective. The Series 7000 boasts the largest number of custom circuits to match applications found in the market. Examples include; 1 or 4 Amp reed switches, normally open, normally closed or SPDT switch types, reed or electronic sensing elements in the same package style, and the industry’s first 120 VAC Hall sensor. A wide range of enclosures and connector options are available. To reduce stocking requirements,
Canfield Connector is known for its robust connections with an American twist, and the CANFAST brand of M8 electrical connectors are no exception. This family of robust, all molded anti-vibration electrical connectors for sensors and actuators are specified by those needing a sure connection to valves, sensors, or automation of all types. Available in all industry styles including shielded and unshielded, and in various wire lengths. The CANFAST round connectors are made in the USA to strict quality standards and are ready for fast delivery.
The Canfield Connector Electronic Inclinometer Sensor EiS is an instrument designed to measure angles of slope, tilt, or elevation of an object with respect to gravity based on an artificial horizon. Synonyms include tilt sensor, tilt switch, clinometer, slope sensor, slope gauge, level sensor, level meter, tiltmeter or pitch and roll sensor. The EiS Series is an all solid-state, MEMs device designed to measure tilt while reporting the data within 0.3 degrees accuracy +/- 85° with an analog output of .5 to 9.5 Volts DC, 4 -20mA.
The GatorMate™ brand of electrical connectors from Canfield Connector are as tough as their name. This innovative rugged 5JGT connector marries our popular fully molded 5J connector to the Deutsch style GT 2 Pin Receptacle connector, exceed-ing expectation. The over-molded 5JGT mobile hydraulic DIN Style “A” EN175301-803 (Formerly DIN 43650) to GT DT04-2P Adapter/connector solution is designed for use with hydraulic valves to facilitate connection to the DT06 mating connector. The connector is available with indicator lights and surge suppression and unlighted black or grey housing for “A” and “B” solenoids. All standard voltages are available and the housing is IP67 environment rated. The product is designed to adapt DIN 43650 Form “A” solenoid coils to the GT connector found in many mobile hydraulic solenoid valve applications. Proudly made in the U.S.A.
English 
Español de México