The VERSA C-Series valve is an extremely reliable valve that can hold up in extreme elements. All the C-Series solenoid valves utilize a high-performance solenoid pilot design. This design takes advantage of the available media pressure/force to shift valve assuring positive shifting. A low power solenoid controls the pilot signal which provides the positive force for shifting the valve spool. Solenoid/pilot supply can be either Inpilot or Expilot
Tag: solenoid valves
Humphrey’s Balanced Solenoid Valves
The Humphrey Balanced Solenoid Valve family of 3- and 4-port direct acting valves now includes IP67 rated, environmentally protected models. Through extensive testing, Humphrey has certified IP67 models to withstand dust ingress completely, and submersion in water to a depth of one meter over 30 minutes. IP67 models are available with DIN electrical entry and without an override. Humphrey DIN connector HS2-CLL is suitable for IP67 protection as well.
Spartan Solenoid Operators
The Spartan Scientific Series 1500 is a 15 mm wide 2-Way & 3-Way, 2-Position solenoid valve which features small size with large flow and consistent, repeatable function. Available in orifice sizes 0.8, 1.0, 1.1 and 1.5 mm, the Series 1500 can flow up to a Cv of 0.04 and offers pressure range from 0 to 145 PSI in the 2.5 watt versions. The 9.4 mm electrical pin spacing is an industry standard. The valve body is made from durable thermoplastic and comes standard with a push non-locking manual override. Featuring an environment resistant IP 65 rating, the valve can withstand humid and dirty conditions. The Series 1500 features a captured exhaust port that is connected through the sub-base. Available in 12 or 24 VDC or 24, 110 and 220 VAC, the Series 1500 boasts
Spartan’s Solenoid Valve Dosing Pumps
The Spartan Scientific Series SSDP15 high precision, fixed volume, fluidic diaphragm solenoid pump is an inert miniaturized pump in an environmentally resistant package that features a fully encapsulated solenoid design offering flying leads, AMP Faston crimp, or industry-standard quick connector with or without indicator lights. The SSDP15 features a flexible-use form factor interface for a manifold with O-ring static seals or single-use models using 1/16” tubing. This self-priming pump draws a low 3.5 watts and is available in 24VDC. The SSDP15 can dispense up to 10.5 mL/min continuous duty cycling at 5 Hz. The maximum cycle rate is 6 Hz and is designed for 20 million cycles of service. It has been designed from the ground up to work within the rigorous environments of scientific and medical industries that employ the need for finite control of fluids.
Canfield Solenoid Valve Connectors
The Canfield Connector 5F Series all-molded DIN solenoid valve connector/gasket/cord assembly offers a completely molded design that is far better for environmental integrity than field wire versions. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The low profile “straight-line” interface/cord configuration allows for installation in many limited space applications. The integrated gasket design boasts an IP67/NEMA 6 rating and makes it impossible to lose the gasket. The 5F and 5J are the only molded valve connectors in the industry that feature a Hard Usage cord option in any length required, bi-directional indicator lights, and load suppression (not intended for UL 1449). UL and CSA versions are available as well. Canfield Connector offers any version of the 5F connector with special wires including high flex, media compatible wire, special use wire, high temperature wire on request.