The GatorMate™ brand of electrical connectors from Canfield Connector are as tough as their name. This innovative rugged 5JGT connector marries our popular fully molded 5J connector to the Deutsch style GT 2 Pin Receptacle connector, exceed-ing expectation. The over-molded 5JGT mobile hydraulic DIN Style “A” EN175301-803 (Formerly DIN 43650) to GT DT04-2P Adapter/connector solution is designed for use with hydraulic valves to facilitate connection to the DT06 mating connector. The connector is available with indicator lights and surge suppression and unlighted black or grey housing for “A” and “B” solenoids. All standard voltages are available and the housing is IP67 environment rated. The product is designed to adapt DIN 43650 Form “A” solenoid coils to the GT connector found in many mobile hydraulic solenoid valve applications. Proudly made in the U.S.A.
The 1/4″ flow DPC Series couplings feature a dual port connection in a contoured design that delivers ease-of-use and excellent flow in a compact size. Made from acetal thermoplastic, the DPC Series includes valved and non-valved couplings with a single plastic thumb latch. One-hand operation makes the DPC Series the choice for simple, simultaneous connections and disconnections where two fluid lines are required.
The life science industry is an umbrella term used for companies, businesses, and researcher institutions, who are developing products and equipment that help improve and prolong organism life. This includes those in pharmaceuticals, biotechnology, medical, and digital health. If something is scientific or science-related, you can assume it is a subcategory in the life science industry. This industry is important for our own lives, as well as the health of our environment. Our suppliers have been focusing in on this expanding industry, especially in the pharmaceutical and medical practices.
The Spartan Scientific Series 3B23 is a compact, media separated 2-Way Normally Closed solenoid valve for use with air, chemicals, gases or water whereby the media is contained in the nylon body valve cavity and does not come into contact with the metal parts of the solenoid operator. The 3B23 features a long life solenoid that incorporates a fully encapsulated coil, stainless steel plunger and tube assembly as well as a rolling diaphragm which enables the valve to function at pressures up to 120 psi with orifice size of 1.2mm and a flow rate of 0.06Cv. The single in-line valve body features metal reinforced 1/8”NPT threads and has an ultra small volume and simple flow path for clean switching. The valve is available in all standard voltages and comes standard with a 6.5 watt coil.
Optional toothed belt drive for high acceleration and speed or spindle drive for precise positioning given high drive forces.
Adaptable drive motor
Optional belt or spindle driven
Various guide options
Cost-effective basic version with basic functions
Integrated cover tape
The slide is driven by a toothed belt or a ball screw spindle and precisely guided by a (double) profiled rail guide. The cover band runs through the slide and covers the drive and guidance. The servomotor is usually connected to the profile via the drive shaft.
Enidine’s NEW PXR Series small bore non-adjustable hydraulic shock absorbers can accommodate a large array of energy input conditions. This new expanded line of tamperproof industrial shock absorbers provides consistent performance, cycle after cycle. The new PXR models are designed to absorb maximum energy within a compact envelope size while providing you with stable performance over the life of the product.
The Canfield Connector 5F Series all-molded DIN solenoid valve connector/gasket/cord assembly offers a completely molded design that is far better for environmental integrity than field wire versions. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The low profile “straight-line” interface/cord configuration allows for installation in many limited space applications. The integrated gasket design boasts an IP67/NEMA 6 rating and makes it impossible to lose the gasket. The 5F and 5J are the only molded valve connectors in the industry that feature a Hard Usage cord option in any length required, bi-directional indicator lights, and load suppression (not intended for UL 1449). UL and CSA versions are available as well. Canfield Connector offers any version of the 5F connector with special wires including high flex, media compatible wire, special use wire, high temperature wire on request.